COVID-19 Update: Shipments continuing normally. We ship from multiple states. Some carrier delays - mostly minor. Express Post available.

Printable Clamshell Label PVC Paper Mylar Adhesive Blank Card CR79 / CR80

Free Shipping for orders over $350.
SKU: SF6003

$0.69
Including Tax
pcs

These printable adhesive sticker labels are thin PVC cards that are specifically cut to fit most thicker clamshell access cards (including the HID 1326 ProxCard II Clamshell Prox Card, HID iClass 2080, Indala FPCRD, XceedID 7410, and Casi CX-CRD (and compatible versions of these cards) and can be personalized with ID data, images and logos using an ID card printer.

These can either be printed by you with your ID card printer or by us with our printer for you.  Once printed, simply peel back the adhesive and stick them to your Clamshell Prox Card.

Important: There are two sizes of label cards (select in options above)Both sizes fit the HID 1326 ProxCard II Clamshell Prox Card, HID iClass 2080, Indala FPCRD, XceedID 7410, and Casi CX-CRD cards (or compatible cards) but they attach and print a bit differently.

There are also two types of backing material: Paper backed and Mylar backed (select in options above).  The outcome of printing on either type is the same (a 10 mil card with an adhesive on the back that can be adhered to a card). However in regards to printing, Mylar backed cards are optimal - they pass easier through most card printers as they are 30 mil thick (0.76 mm) (10 mil card with a 20 mil backing) which is the same thickness of a normal PVC card. Paper backed cards have a thinner layer of paper as the backing and these are more likely to flex or jam as they go through printing.

1) CR79 size (HID1324)

Slightly smaller than the HID 1326 ProxCard II (or compatible card), these label cards are designed to stick on the inside edge of proximity cards resulting in a small border. 

  • Code: HID1324GAN31
  • CCR79 size - 83.9 mm x 51 mm
  • Thickness:
    • Paper Backed: 1 mil (0.25mm) (after removal of the adhesive back), 0.2 mil (0.51 mm) (before removal of the adhesive back)
    • Mylar Backed: 1 mil (0.25mm) (after removal of the adhesive back), 0.3 mil (0.76 mm) (before removal of the adhesive back)
  • Due to their specialized size, CR79 cards do not work in every ID card printer. Be sure to check your printer compatibility for CR79 cards. If you don't have a compatible printer, we recommend using a CR80 Adhesive Card. Not compatible with Magicard printers.

2) CR80 size (CR80.014)

These adhesive sticker cards are the same size as clamshell access cards.  So they work in a larger range of printers. Some people prefer this size of card because they are easier to apply (as they are the same size).  Whilst others prefer the smaller CR79 size as these CR80 size cards will lay on top of, not within, the proximity cards borders resulting in a slightly thicker card.

  • Code: CR80.014
  • CCR80 size - 85.6 mm x 53.98 mm
  • Thickness:
    • Paper Backed: 1 mil (0.25mm) (after removal of the adhesive back), 0.2 mil (0.51 mm) (before removal of the adhesive back)
    • Mylar Backed: 1 mil (0.25mm) (after removal of the adhesive back), 0.3 mil (0.76 mm) (before removal of the adhesive back)
  • Can fit most ID card printers. However, 25mm cards may not feed into every card printer. Please check your card printer specifications. Compatible with Magicard Rio 2e, Tango 2e, Enduro, Avalon, Avalon Duo, Tempo, and Pronto printers.br>

Similar Product Codes
82266-100
82267-100
BC-AD10-CR80
M3610-054B
CR80.014
CR8014
81759-100
HID1324
HID1324GAN31
81759
HID1324GANS
CR7910
CR79.010
CR7910AB
1324GAN11
1324GAV11
1324GBV22
1324GBN22
1324GAV21
1324GAN22

Similar Products

Also Purchased Products